I wanted to make a card with cut out birds on it. My initial idea was to have 3 different paper patterned birds sitting on a 'wire' fashioned from silver thread. I cut out the birds which looked great standing alone, but just couldn't get a grouping I was happy with overall. Then, flicking through my pretty card stash I found this piece of green patterned card with what could be blue branches and a glittery white flower. With the word 'Pretty' stuck on the outside and 'Cute' on the inside, just right to sit beside a crepe paper flower on the latest baby gift. Pretty Cute.
Thursday, 30 June 2011
Monday, 27 June 2011
A Stormy night, more Cards and a Baby
It was a dark and stormy night my friends, but the desire to craft overcame the fear & I braved the howling gale, the lashing rain & the flooded intersections to drive towards the Northern Lights and meet two of the girls, one looking full to bursting with an ever growing baby belly.
As much fun as we had, it didn't feel quite the same with one of the gang having moved down towards the Southern Lights to be with her boy, but those of us remaining did our best to create.
Sitting around the table we joked that we may end up being helpers in the birth of the baby hootchie-ette due the very next day, and little did we know how close that was to being fulfilled. Not much more than 15 minutes after we left contractions began and now there is another little being for which to make little clothes and toys and cards!
As much fun as we had, it didn't feel quite the same with one of the gang having moved down towards the Southern Lights to be with her boy, but those of us remaining did our best to create.
Sitting around the table we joked that we may end up being helpers in the birth of the baby hootchie-ette due the very next day, and little did we know how close that was to being fulfilled. Not much more than 15 minutes after we left contractions began and now there is another little being for which to make little clothes and toys and cards!
Tuesday, 21 June 2011
We all scream for ice cream
Another 3 Suffolk Puffs get put to good use atop an ice cream cone....
Basic Tutorial:
- Draw a cone shaped triangle on your 'heat-and-bond' or similar iron on adhesive product & cut out. Iron this triangle onto the fabric you've chosen as the cone. I had some stripy orange-ish fabric that worked well for my waffle cone. Then cut out the 'heat-and-bond' backed fabric triangle.
- Using a water soluble fabric pen, rule lines parallel to the long edge of each side of the triangle. These will form the guiding 'waffle' lines to sew along on the cone.
- Next sew 3 Suffolk puffs out of plain coloured fabrics - these will become the scoops of ice cream.
- Iron the cone in place onto the garment you've chosen to use (I've used a baby grow).
- Using a short length (2.0) straight stitch sew around the edge of the ironed on cone & then along each of the ruled lines to create a waffle pattern ( I later ended up using a close zigzag stitch around the border of the cone to help it stand out once the Suffolk puffs were stitched in place- you can see this in the finished ice cream cone at the top of this entry).
- Pin the Suffolk puffs in place overlapping each other and the cone & then hand stitch each one using matching thread.
- Almost good enough to devour!
An even easier crinkly crunchy tag toy
Not necessarily the most difficult part of making a tag toy, but adding a bit more time & fiddliness, is having to turn it right side out after sewing the tags in place (see my blog entry of May 24, 2011). How could I make this toy even easier to make? By using a fabric that doesn't fray of course - maybe felt or fleece.
Fleece feels a bit softer to touch and I had some perfect sized scraps of a multicoloured polka dot fleece left over from a blanket mum & I made for Little Imp last year that I thought might just do the trick.
Basic Tutorial:
- cut 2x approx 7inch squares of a fleece fabric
- cut a 4 inch cello square
- place cello in the centre on the wrong side of one fleece square and pin in place (insert pin from right side of fabric so that you can remove it later)
- If you want to add a label then sew that in place now onto one of the fleece squares
- match fleece squares wrong sides together (so the cello ends up sandwiched in between) and insert a few pins about 1-2 inches from the edges (this helps to keep the pieces matched while you insert the ribbons)
- cut out your various pieces of ribbon, some long (to double over twice) and others shorter. Use different widths, textures & colours to add to the sensory input the toy provides. I decided to also use some matching scraps of fleece to make tags
- Then double or double over twice each piece of ribbon, tuck it between the fleece squares and pin in place. Be generous with the pins and even more importantly, make sure you are generous with the amount of ribbon caught between the fleece so that it is well stitched in place when you sew the squares together
- Using a straight stitch, machine stitch the fabric squares together about 0.5 cm from the edge, removing pins as you go & ensuring you catch all the ribbons
- Then sew a second time around about 1cm from the edge, parallel to the first stitched border to really make sure the ribbons don't come loose
- Sew a small '+' in the centre of the toy to secure the cello (approx 3cmx3cm). You could use a decorative stitch if you like.
- Trim the threads, remove the pins (of course), and you are done.
No decent shots of the finished product I'm afraid, just a snap of them as part of the gift bundles for some girls at work.
Thursday, 16 June 2011
Alphabet stamps ..... I Like!
Another night of crafting during some Hootchie Hang Time with the girls and after some dinner & bottling of farm grown pears we got down to it.
Ergonomics Bollocks was up to her usual tricks with her power tools and this time (believe it or not) pieces of sticky tape, to build multi-hinged little glass door cabinets to hold all of her beautiful hand made ear rings.
That left Happy & I at the table cutting and sticking and punching and stamping cards. And that was where the 'I Want' comes into it. I'd fallen in love with the cute stamped greeting in the card Happy gave me for my birthday a few months ago, but after having the chance to use her alphabet stamps myself I really fell in love with them. Little wooden blocks, edged with mini rubber letters in a little corrugated cardboard box. I like!
So I stamped the 'thank you' cards I'd made.
I like! (if I do say so myself)
Ergonomics Bollocks was up to her usual tricks with her power tools and this time (believe it or not) pieces of sticky tape, to build multi-hinged little glass door cabinets to hold all of her beautiful hand made ear rings.
That left Happy & I at the table cutting and sticking and punching and stamping cards. And that was where the 'I Want' comes into it. I'd fallen in love with the cute stamped greeting in the card Happy gave me for my birthday a few months ago, but after having the chance to use her alphabet stamps myself I really fell in love with them. Little wooden blocks, edged with mini rubber letters in a little corrugated cardboard box. I like!
So I stamped the 'thank you' cards I'd made.
I like! (if I do say so myself)
Saturday, 11 June 2011
Organised...Disaster
I've been needing some new ribbon for a while, for embellishing cards, making some more taggy baby toys and no doubt many other projects I am yet to think of. Scouting around Spotlight I chanced upon a whole 3 racks of clearance ribbons by the spool, only 70c each, so I stocked up.
Looking at the state of my current messy ball of existing ribbons, and with my need for order I decided to fashion a ribbon box to keep these ribbon spools mess free. I'd seen something along these lines a while back in a craft magazine, but that was much fancier than what I had in mind. A cardboard takeaway box that I'd been keeping for goodness knows what was finally put to use. 3mm wide spools along one side, 10mm spool along the other and holes made to thread the ribbon through. A bit of prettiness stuck to the top of the box and hey presto, ribbon box complete!
ps. if you too have a Little Imp you might want to work out a way of securing the lid of your box better than I did first time around!
Looking at the state of my current messy ball of existing ribbons, and with my need for order I decided to fashion a ribbon box to keep these ribbon spools mess free. I'd seen something along these lines a while back in a craft magazine, but that was much fancier than what I had in mind. A cardboard takeaway box that I'd been keeping for goodness knows what was finally put to use. 3mm wide spools along one side, 10mm spool along the other and holes made to thread the ribbon through. A bit of prettiness stuck to the top of the box and hey presto, ribbon box complete!
..... And then....
.... Disaster Struck....
Disaster in the name of Little Imp.
My fault really, leaving the box within reach, but oh what a tangled mess!
Basic 'How To':
- Find a box that snugly fits all the spools of ribbon you have either in one row or two
- Using a sharp implement poke/cut holes enough to match the number of spools in the box
- Then poke through the ribbon from the end of spool and place the spools side by side in the box
- This will leave you with a small piece of each ribbon sticking out each hole ready to unravel without tangle
ps. if you too have a Little Imp you might want to work out a way of securing the lid of your box better than I did first time around!
Wednesday, 8 June 2011
Preserving olives
Maybe I need a new category, one to encompass food related topics, another 'C'... Culinary perhaps?
We have an olive tree in our yard & last year I gave preserving olives a go. Trawled the internet & some old home style magazines for instructions on the preserving process. I hadn't realised an edible olive takes so long to create! I bottled them just before Little Imp was born and it wasn't until Christmas, 8-months later, that they tasted good enough to eat.
This year Gnarled Trunk initiated the picking and preparing of the olives for bottling and we preserved on a bigger scale after the success of last year's batch. Guess what you are all getting for Christmas peoples!
We have an olive tree in our yard & last year I gave preserving olives a go. Trawled the internet & some old home style magazines for instructions on the preserving process. I hadn't realised an edible olive takes so long to create! I bottled them just before Little Imp was born and it wasn't until Christmas, 8-months later, that they tasted good enough to eat.
This year Gnarled Trunk initiated the picking and preparing of the olives for bottling and we preserved on a bigger scale after the success of last year's batch. Guess what you are all getting for Christmas peoples!
Recipe:
I mixed together different bits from a number of recipes to end up with a fairly environmentally friendly method (not too much salty water wasted) as follows.
- Pick enough olives to fit into container of choice. I picked them when black (mid April in Perth).
- Sterilise 3 sewing pins & poke them through a small piece of Styrofoam, then prick each olive with this contraption a few times (beats using a single pin to prick, prick, prick, prick).
- Cover olives with water & weigh down with dinner plate or similar to keep all olives submerged.
- Change water daily for 2 weeks.
- Over the 3rd week, add a few tablespoons of dissolved salt for each litre of water in the container. Continue to change this water/salt solution daily.
- The olives are likely to still taste pretty bitter at this point, but are ready to be bottled
Bottling -
- Make sure you have nice clean jars for bottling
- Pack olives into each jar (firmly so they don’t float up too easily when add vinegar solution)
- Make up a solution with the ration of ¾ cup warm water, 2.5 tbs salt and ¼ cup white wine vinegar, stir to dissolve as much salt as possible. (the amount of salt needed will vary dependant on how salty your water already is (a 1997 Gardening Australia magazine suggested to work this out by making a brine using enough salt to make a fresh egg just float under the water's surface).
- Pour enough of this brine & vinegar solution into each jar to cover the olives.
- Pour over a layer of olive oil to prevent the olives on the top drying out & screw lid onto jar.
- Leave the olives to soak for at least 4/5 months & then test to see if they are edible.
- To prepare for eating rinse off brine & then leave olives in fresh water in the fridge for a day or 2, changing the water every 24 hours.
- Add flavouring such as chilli, garlic, lemon, crushed coriander or fennel seeds, whatever you desire or have in the pantry & enjoy!
Monday, 6 June 2011
Nature Ranger
Gnarled Trunk (Husband) proudly led me to see the blooming roses in the front garden this afternoon and I then got a bit carried away with the camera. Made a wonderful contrast to yesterday's mammoth task of beginning our extension, jackhammer-time pounding for most of the morning to dismantle the patio concrete and relocate it into the old swimming pool pit in the backyard.
When I was little-er I thought I might become an entomoligist when I grew up. My love for all creatures great & small (except for cockroaches that is) earned me the nickname of Nature Ranger. Today the bug-loving Nature Ranger in me today couldn't help but not just see the kangaroo paws in the front garden but also the teeny tiny ants harvesting their pollen.
When I was little-er I thought I might become an entomoligist when I grew up. My love for all creatures great & small (except for cockroaches that is) earned me the nickname of Nature Ranger. Today the bug-loving Nature Ranger in me today couldn't help but not just see the kangaroo paws in the front garden but also the teeny tiny ants harvesting their pollen.
Friday, 3 June 2011
The first passionfruit
Hiding away between the leaves of the passionfruit vine the first fruit has been spotted - and it is a big one!
Finally, the Eye Spy quilt is complete
A friend's little one had an 'eye spy' quilt that looked like so much fun I asked mum to make one for Little Imp. She agreed, but left it up to me to begin to collect fun bits of fabric to use in the quilt. It didn't take long for me to become hooked with all the beautiful fabrics I found on line and, with a bit of encouragement from mum, I decided I'd try my hand at piecing together a quilt myself.
The design of the quilt took shape as I gathered all the fabric pieces, and I ended up using a central plain colour square surrounded by 8 coordinating picture fabric squares to make up each block.
The process of working out which part of each fabric would be the most fun to use, and the ordered process of rotary cutting appealed to methodical me, but the part I really enjoyed was playing around with all the fabric squares to create a layout that I was happy to look at. A layout where adjoining colours worked together and any fabric doubles were far enough apart not to be noticeable. I spent hours just playing!
The end result, a 4x4 layout of blocks, quilting around each block in purple and around each central coloured square in matching colour thread. As you can see, Little Imp isn't quite at the right age just yet to appreciate the 'eye-spy' feature of the quilt. Oh so interested she was in crawling all over the pieces as I was in the process of trying to design the layout, and then when I wanted a photo of her sitting on the finished product she just kept crawling away!
The design of the quilt took shape as I gathered all the fabric pieces, and I ended up using a central plain colour square surrounded by 8 coordinating picture fabric squares to make up each block.
The process of working out which part of each fabric would be the most fun to use, and the ordered process of rotary cutting appealed to methodical me, but the part I really enjoyed was playing around with all the fabric squares to create a layout that I was happy to look at. A layout where adjoining colours worked together and any fabric doubles were far enough apart not to be noticeable. I spent hours just playing!
One of many trial layouts |
Thursday, 2 June 2011
Springtime flowers
There is a definite chill to the air, finally. Winter is here and the rains have also fallen for the last few days, finally. The plants in the garden are perking up again, and the kangaroo paws are beginning to flower. Perhaps this is what prompted the flower design of today's creation with the aim of using up some of the Suffolk Puffs I had lying around.
I discovered how to make 'Suffolk Puffs' in a craft magazine late last year, and since then have found a number of applique uses for these handy, and very quick and easy to make, little circles of fabricy-puffiness.
Springtime Flowers |
- Make 3 Suffolk puffs, one slightly larger than the others as follows:
- for each puff, cut out a circle of fabric approximately 2/3rds larger than you want the finished puff to be
- using a needle and thread, use a running stitch to sew all the way around the circle, turning over a small seam as you go
- pull up both ends of the thread to form a little pouch, knot ends together and then flatten fabric to create the puff.
- Sew 3 stems onto the baby grow using straight stitch on a machine
- Cut out 3 pieces of green fabric with 'heat and bond' ironed onto one side to create the leaves and then iron these in place
- Machine applique the 3 leaves using a small straight stitch and stitching around each leaf twice. Don't worry about sewing a perfectly straight edge, as long as you catch the edge all the way around to prevent excessive fraying.
- Hand stitch the Suffolk puff 'flower' heads in place & you're done.
Wednesday, 1 June 2011
How many ways to use a Suffolk puff?
I do like these quick to make little yo-yo's or Suffolk puffs as they are otherwise known, so many uses!
Some other Suffolk Puff ideas rattling around in my brain....ice cream in an ice cream cone... caterpillar...'bunch' of flowers, surrounded by single leaves. Something I saw - a plain skirt with vintage fabric puffs all around the bottom edge.
Balloons floating in the breeze |
Owls in a tree of blooms |
Springtime flowers |
The wheels on my bike go round & round |