Another felt vegetable installment, this time a variation on the original felt carrots I made a while back. Little Imp loves helping her dad in his garden, and takes delight in seeing the different colours of the heirloom carrots coming out of the ground, including the red 'beetroot' carrots.
The method for making these is the same as my original carrot post, but with one final step to make them a bit more 'bunky', a bit less like the straight, symmetrical shop bought variety.
To achieve the kinks in the carrots secure a doubled over matching thread somewhere along one one of the sewn lines on the carrot, then fold the carrot over & pass the thread through to another sewn line. Keeping the carrot bent between these two lines, tie off the thread. When you let go, the short secured thread will maintain some of this bend as a kink in the carrot. Add more kinks if you like for a really bunky carrot!
I liked the more authentic look this gave the carrots so much I have now added some kinks to the stock standard orange carrots too.
Now if only I could actually get Little Imp to eat carrot!
Showing posts with label felt. Show all posts
Showing posts with label felt. Show all posts
Friday, 11 July 2014
Thursday, 10 July 2014
Felt Mushroom
I'm on a bit of a roll with felt fruit & veg again. Little Imp is pretty excited to have some additions to her original fruit basket.
Little Imp is known as 'Mushroom Girl' by our local greengrocer given we very often buy a mushroom or two to nibble on the way out. About time I made some mushrooms then!
Prepare the pieces you need for the mushroom:
Create the stalk by rolling up the felt along the short edge and then stitch to secure along the open seam. I also ran a thread through the width of the stalk a few times for extra hold.
Assemble the mushroom by adding a small amount of stuffing into the ‘bowl’ (definitely don't over stuff these ones). Then pull up the thread to begin to close the hole until it matches the diameter of the stalk, then tie off the thread to secure.
Poke the stalk into the hole and then sew back around the mushroom passing the needle through the gathers of the button top & the stalk in turn to attach the gathered top securely to the stalk. When doing this, make sure to keep the mushroom top quite flat (that is, when passing the needle through the stalk make sure you keep close to the top end of the stalk).
Once stitched all the way around, pass the needle through the stalk several times from different spots to really secure the stalk to the 'button' of the mushroom.
Oh by the way...
A fruit basket that can also become a chef's hat apparently!
Little Imp is known as 'Mushroom Girl' by our local greengrocer given we very often buy a mushroom or two to nibble on the way out. About time I made some mushrooms then!
Prepare the pieces you need for the mushroom:
Mushroom button 'top' – Use something circular as a template (like a glass) to draw and
then cut out a circle approximately 8cm in diameter.
Mushroom stalk – cut a rectangle approx 3cm x 6cm.
Create the stalk by rolling up the felt along the short edge and then stitch to secure along the open seam. I also ran a thread through the width of the stalk a few times for extra hold.
Now for the button top. Double
over some matching thread & secure at a point on the edge of the circle.
Then, using a running stitch, sew all
the way around the mushroom top, close to the edge, in the same way you would
to create a Suffolk puff. Once back to where you started, pull the thread to
gather and form a little bowl.
Assemble the mushroom by adding a small amount of stuffing into the ‘bowl’ (definitely don't over stuff these ones). Then pull up the thread to begin to close the hole until it matches the diameter of the stalk, then tie off the thread to secure.
Poke the stalk into the hole and then sew back around the mushroom passing the needle through the gathers of the button top & the stalk in turn to attach the gathered top securely to the stalk. When doing this, make sure to keep the mushroom top quite flat (that is, when passing the needle through the stalk make sure you keep close to the top end of the stalk).
Once stitched all the way around, pass the needle through the stalk several times from different spots to really secure the stalk to the 'button' of the mushroom.
A fruit basket that can also become a chef's hat apparently!
Thursday, 3 July 2014
Felt Avocado
Avocado aficionados will know that
avocados come in many colours and shapes. Bet they never knew though that it is a whole lot easier to make a Shepard Avocado out of felt than a Hass. (And did you know that the flesh of a Shepard doesn't go brown once cut?!?)
Stitch 2 of these pieces together down one side from one point to the other.
Then take the third/last piece of the avocado body and place this on top as shown below, matching up the edges all the way around.
Stitch from top to bottom along the right side seam.
This will leave you with one seam left to sew.
Again, match up the seams and stitch from the top, to bottom - making sure to leave an opening at the bottom end for turning right side out.
Turn right side out & stuff before stitching the opening closed with matching green thread. Don’t worry if it isn’t nicely rounded at the base – a real avocado isn’t!
Mmmm...
Why?
Because I had green not brown felt…because
I wasn’t sure how to get the Hass’s wrinkly skin without a lot of work….and
because the Shepard shape looked easier to replicate!
Finished size – approx 10cm high.
Materials - light tan felt (about 15cm square), brown felt scraps, dark green felt (small piece) needle, thread, stuffing, sewing machine.
Materials - light tan felt (about 15cm square), brown felt scraps, dark green felt (small piece) needle, thread, stuffing, sewing machine.
Prepare the pieces - From green felt cut 3
pieces of the avocado template shape for the 'body', and 1 dark brown circle for the 'pedicel'.
Stitch 2 of these pieces together down one side from one point to the other.
Then add the 3rd piece. The best way I've found to do this is to take the joined pieces, and fold over half of the top pieces (as seen on the right in picture below)
Then take the third/last piece of the avocado body and place this on top as shown below, matching up the edges all the way around.
Stitch from top to bottom along the right side seam.
This will leave you with one seam left to sew.
Again, match up the seams and stitch from the top, to bottom - making sure to leave an opening at the bottom end for turning right side out.
Turn right side out & stuff before stitching the opening closed with matching green thread. Don’t worry if it isn’t nicely rounded at the base – a real avocado isn’t!
The Pedicel –
(or little brown circle where the avocado used to attach to the tree!).
Using matching thread, sew
the brown circle near the top of the avocado using a blanket stitch.
For the final step, use
the longest needle you have as you need to stitch with a double thread from within
the brown circle pedicel all the way through to the base, coming out where the
seams meet. If your needle isn't long enough then squish the avocado down to
get the needle through. Pull the thread tight enough to create slight
indents at the top and bottom of the avocado and stitch in place to secure.
Felt Mandarin
It is mandarin season, so the perfect time to make some of these little gems.
Finished size: approx 4.5cm high, 6cm wide
Materials - orange felt (about 20cm square), green felt scrap, needle, thread, stuffing, sewing machine
Mandarin 'body' -
Then match the last two open seams together and stitch this final seam to create a 4-piece 'ball' - remembering to leave a 2-3cm opening at one end for turning right side out and stuffing the mandarin.
Turn the mandarin right side out...
...and fill with stuffing. Hand stitch the hole closed using orange thread. This end will be the base of the mandarin.
To shape the mandarin secure thread where all the seams meet at the top of the fruit with a double thread & then pass the needle all the way through to where all the seams meet at the base of the fruit. Pull tight enough to form a bit of an indent at the top & base & then tie off securely.
And then make another!
Tutorial
Instructions for one mandarin.Finished size: approx 4.5cm high, 6cm wide
Materials - orange felt (about 20cm square), green felt scrap, needle, thread, stuffing, sewing machine
Mandarin 'body' -
From orange felt cut 4
pieces of the mandarin template shape.
Take 2 of the body pieces,
place one on top of the other and stitch together down one side from one
point to the other. Then do the same with the remaining 2 pieces.
You now have two halves of what will become the whole mandarin.
Open up each half and then
match up, right sides together along. Stitch from one point
to the other down one of the seams.
Then match the last two open seams together and stitch this final seam to create a 4-piece 'ball' - remembering to leave a 2-3cm opening at one end for turning right side out and stuffing the mandarin.
Turn the mandarin right side out...
...and fill with stuffing. Hand stitch the hole closed using orange thread. This end will be the base of the mandarin.
To shape the mandarin secure thread where all the seams meet at the top of the fruit with a double thread & then pass the needle all the way through to where all the seams meet at the base of the fruit. Pull tight enough to form a bit of an indent at the top & base & then tie off securely.
Mandarin top or 'pedicel’ (the green bit, where the flower
stalk attached once upon a time.)
Cut a small 1cm square from green felt & then snip away to form a
rough 4 or 5 point star sort of shape.
With matching green thread attach this ‘pedicel’ to the ‘top’ of the
mandarin.
Monday, 23 December 2013
Peg Dolly Angels
A chorus of Angels have been created this Christmas, although I have only photographed one.
Pattern courtesy of Better Homes and Gardens magazine.
Felt, dolly peg and pipe cleaners are the main ingredients, with embroidery thread to hold the felt together/ embellish the wings and then some glue to hold the wings, halo and dress in place.
Pop the finished dress over the peg to dress the angel and thread the pipe cleaner through the sleeves to make the arms and then twist the extra lengths of pipe cleaner up behind the head to create the halo. Add a pen drawn face and some slippers to finish.
Friday, 20 December 2013
Feeling Christmassy!
Someone is a bit excited about Christmas this year...
and so am I! Any excuse to be extra crafty & creative:) A Christmas Grinch dress/top for Little Imp that received the seal of approval.
Of course a Christmas hair clip is also required to finish the look. Same technique I've used before to make a felt hair clip. Simply cover a clip with felt sewn together with blanket stitch & then glue on something Christmassy - a wooden tree decoration in this case.

I think we are almost ready for Christmas day!
Tuesday, 17 December 2013
Some more elephant softies
I made a felt elephant recently for Little Imp's cousin....
...and then, perhaps against my better judgement (given the excessive number of soft toys Little Imp already has) I agreed to make her one for Christmas too. Given she is a bit older now I thought a cotton print fabric for the body would be more fun. And I think I was right!
Given how much I liked how that one had tuned out I figured I may as well make her other cousin one too.
So now I have 3 elephants waiting to meet their owners.
I have made elephants for friends before from this Woman's Weekly pattern, but this time I also worked out a great way to add a 'jingle'. I've found in the past that when I insert the little metal bells into softies that the bell becomes far too muffled by all of the fibre fill. My solution in this instance was to do away with the bell altogether & instead I put some beads into a small plastic canister about 4cm high x 2cm diameter. The elephant is fat enough that I could stuff the canister into the middle of it's body still not really don't notice it among all the stuffing. Super Jingly too!
A link to some other elephant softies I've made in the past
Saturday, 13 July 2013
Felt Weekly Activity or Routine Planner
Little Imp often asks in the morning, 'where am I going today'. Fair question given she spends her week days between mother-in-law, Daycare, Nanny or home with mum or dad, and then quite frequently we head away for the weekend to my parent's house.
I saw an in for creating a felt 'weekly activity planner'. Something Little Imp could use herself to look at and know the plan for the day.
My idea was 2 inch felt squares as a base, embellished with different symbols to represent the many places Little Imp might go in a week, as well as some of the more frequent activities she's involved in.. I wasn't sure initially if I would attach magnets to these and set the planner up on the fridge, or make a felt board to place in her room.
Here are some of the finished squares. Little Imp helped work out what some of the symbols should be and "assisted" with the gluing. The symbols ended up being made out of a combination of felt, glitter shapes, colored craft foam, scrap booking cut outs and fabric.
The days of the week were machine stitched onto felt.
I did try the magnet idea, but decided against it for a few reasons, so in the end I just cut a rectangle of felt for the backing, turned over about 5cm along the top edge and hand stitched this down. This created a space to thread a heavy piece of card into. I then clipped 2 holes along the top fold & inserted a small bulldog clip to clasp the card & create a loop for hanging.on the back of Little Imp's bedroom door.
After a few week's of use the only addition we've made is to add an arrow that we can move to point to which day 'today' actually is. The concept of today/tomorrow/yesterday is still a bit confusing to a Little Imp!
I saw an in for creating a felt 'weekly activity planner'. Something Little Imp could use herself to look at and know the plan for the day.
Here are some of the finished squares. Little Imp helped work out what some of the symbols should be and "assisted" with the gluing. The symbols ended up being made out of a combination of felt, glitter shapes, colored craft foam, scrap booking cut outs and fabric.
![]() |
We live at number 7 - so these are for days at home |
The days of the week were machine stitched onto felt.
I did try the magnet idea, but decided against it for a few reasons, so in the end I just cut a rectangle of felt for the backing, turned over about 5cm along the top edge and hand stitched this down. This created a space to thread a heavy piece of card into. I then clipped 2 holes along the top fold & inserted a small bulldog clip to clasp the card & create a loop for hanging.on the back of Little Imp's bedroom door.
After a few week's of use the only addition we've made is to add an arrow that we can move to point to which day 'today' actually is. The concept of today/tomorrow/yesterday is still a bit confusing to a Little Imp!
Friday, 30 November 2012
Felt Pear
Tutorial
Instructions for one brownish coloured pear - but you could choose any 'pear-y' colour of your choice.Materials - light tan felt (about 15cm square), brown felt scraps, dark green felt (small piece) needle, thread, stuffing, sewing machine (optional)
Pear leaf
Using a sewing machine free motion embroider a rough leaf shape outline onto green felt Cut out the leaf leaving a small border outside the stitches. Alternatively you could cut out the shape & then hand stitch the detail on later.
Pear stem and 'calyx'
From brown felt cut a 1cm x 1cm square & then snip away at this to get a rough 6-point star shape - this will become the little brown bit you find on the base of a pear.
From brown felt cut a rough 5cm x 2cm rectangle for the stem.
To make the stem with the leaf attached, place the leaf onto the brown rectangle as pictured above. Then roll the rectangle up lengthwise from right to left (towards the leaf), catching the stem of the leaf in the roll of brown felt. Stitch & wrap matching dark brown thread around & around to form the stem & hold it in shape with the leaf firmly attached.
Pear 'body' - From tan felt cut 3 pieces of the pear template shape.
Then add the 3rd piece and stitch in place down one side. Then stitch the final seam to create a 3-piece pear shape', leaving a 2-3cm opening at the base of the pear (the fat end) and a smaller 1cm opening at the top end (narrow end).
Turn pear right side out through the larger hole at the base and fill with stuffing via this same hole. Push the stuffing up so it fills in the narrow top end also, then stitch up the base hole.
Attach the calyx (small brown star shape) to the base of the pear with matching dark brown thread
Now turn your attention to the small hole you left at the top of the pear. Poke a finger down into the hole to create a bit of a gap in the stuffing & then poke the stem part way into the hole. Hand stitch hole closed and also stitch through the stem a few times to secure it in place.
![]() |
2-3 cm opening in stitching at fatter end (right) and 1cm opening at narrow end (left) |
Attach the calyx (small brown star shape) to the base of the pear with matching dark brown thread
![]() |
Left - stuffing hole in base stitched closed. Right - Calyx added and stitched in place |
For this next step, use the longest needle you have as you need to stitch with a double thread from the top of the pear all the way through to the bottom. If your needle isn't long enough then squish the pear down to get the needle through. Pull the thread tight enough to create slight indents at the top and bottom of the pear and stitch in place to secure. This step gives the pear a bit more of an 'pear-y' shape by bringing the top and the bottom points in towards each other.
Subscribe to:
Posts (Atom)